Office enclosures for in-plant areas
or warehouse locations with moderate to low noise levels. Provides a functional, attractive
maintenance free work environment.
Floor Frame
Structural wood floor joists and
multi-ply beams to suit 50 lbs./sq.ft. floor loading and span. 5/8” thick tongue & groove panel
sub-floor fastened securely (glued & nailed) to floor joists. All joints sanded smooth & filled as
necessary.
Wall Frame
Walls have 2” x 4” wood studs with
single bottom & top plates. Window
& door lintels to suit openings.
¼” thick rigid exterior wall sheathing securely fastened to studs.
Roof Frame
Structural wood roof joists to suit
20 lbs./sq.ft. roof storage load & span.
7/16” thick rigid roof sheathing securely fastened to roof joists.
Insulation
Floor - 2 ½” fibreglass
insulation (R8)
Walls - 2 ½” fibreglass insulation (R8)
Roof - 2 ½” fibreglass
insulation (R8)
6
mil - poly vapour barrier
Interior Finish
Floor- 1/8” thick 12” x 12” vinyl composite floor tile. 2 ½” vinyl baseboard.
Walls - easy care vinyl covered ½”
thick gypsum board with colour matched vertical vinyl joint strips. Flame spread rating 25.
Ceiling - Suspended system with
metal tracks and non-combustible white acoustic tiles. Flame
spread rating 25. Clear floor to ceiling height, approx.
7’5”.
Exterior Finish
Roof - 30 gauge Galvanized flat
steel or EPDM rubber membrane.
Walls - 28 gauge Ribbed steel siding
& trims with maintenance free baked enamel finish in a choice of 14
colours.
Underfloor - 1/4'' rigid sheathing glued and nailed to
joists.
Base Supports
3 ½” x 8” x 1 ½” high painted wood
supports (1 ½” clearance for forklift access).
Entrance Door
1 3/8” x 2’8” x 6’8” hollow core
wood stab door in steel frame complete with 1 pair butt hinges, keyed lockset,
sweep seal, threshold & check chain.
Framed sealed with butyl based
sealant.
Windows & Vents
4’ wide x 3’ high aluminum frame
single pane sliding glass windows.
Quantity and size may vary with layout.
Frames sealed with butyl based sealant.
Electrical
CSA approved fixtures, wired and
inspected to electrical code. Standard
pre-wired electrical package includes surface mounted 1’ x 4’
fluorescent light
fixtures with wrap-around acrylic lenses complete with switch and
lamps. Duplex electrical receptacles. Exterior service
entry conduit passes
through wall for ease of hook-up to 15 amp 120 volt site service.
All wiring in concealed in walls and
roof. Check layout or quote for
equipment capacities, quantities and location.
Specifications are subject to change
without notice where required to enhance the value of our buildings.
Request Salesperson Call
Request Quote
Request Product Information
to expand
